The original ports which have been blanked off are visible in this shot
The original build, before it became the Sidewinder. Good WAF rating, but a bit boring...
The new ports let into side wall, straight through the veneer
Close-up of port. In hindsight, some flares would have been good...
Wraparound - LHS
Wrap around ports are visible in this shot. 90 degree elbows were used for the bends
Rear view showing port-wall junction. Elbows are not glued, so port segments can be removed for access to the amplifier
A futile attempt to make it look bigger than it is. I've been told this is a bloke thing.....
Another look at port mounting. The rear of the port slides through rings cut from the ends of joiners